• Igo Primo 2016 Download
• Igo Primo North America

IGO for ANDROID iGO primo Basarsoft 2.4 9.6.29.431282 Android – 9 September 2014 torrent iGO primo Israel 2.4 9.6.29.427562 Android – 28 August 2014. Download IGO Primo 2014 v9.6.29.353462 - 9.6.29.367542 Europe or any other file from Applications category. HTTP download also available at fast speeds.

This fixes a problem I have had with intermittent operation of iGO on a Chinese PNA. If the PNA was started inside it would show no satellite or altitude information when taken outside.

In use, if satellite contact was lost it would often not recover. The GPS information page was often frozen showing only one or two satellites. I have noticed other users with similar problems. This modification was carried out on a Chinese 5' style PNA / PND. It runs WinCE 6.0 The CPU is a Centrality Atlas IV 533MHz with 64Mb ram.

The CPU also contains an integrated SiRF GPS receiver. IGO Primo is loaded on the micro SD card.

Igo Primo 2016 Download

(works great with Nuance TTS on the 64Mb ram) After the modification it will often start navigating inside. Outside it tracks all satellites visible. The GPS information page is always changing and often shows up to 12 satellites. The modification adds a buffering program into the link beween the inbuilt GPS engine and a navigation program, in this case iGO PRIMO. Port Splitter by JAL is used to buffer data between the inbuilt GPS and iGO (Primo) running on the PNA. To tie it all together a MortScript is used. This is used to start Port Splitter then iGO.

Before starting Port Splitter the configuration file is refreshed. This means if the program crashes, on the next restart all setting are correct. The PNA has com1 (4800bd) as the GPS. Port Splitter processes this to com5. So set the GPS port in iGO sys.txt to com5.

To carry out this modification you will need ActiveSync to connect to the PNA. Along with CeRegEditor, a registry editor for all devices based on PocketPC2003, WindowsMobile, WindowsCE. The Port Splitter CAB cannot be installed by the cutdown version of WinCE 6.0 on the PNA. I used MSCEInf to pull the CAB apart. MSCEInf is a utility to find and analyse all the data contained in installation CAB files. Install the components and registry entries by hand. Registry entries to be added: HKEYLOCALMACHINE SOFTWARE JAL Port Splitter: InstallPath REGSZ ResidentFlash Port Splitter HKEYLOCALMACHINE SOFTWARE JAL Port Splitter: MajorVersion REGDWORD 1 Files to be added, located in: ResidentFlash Port Splitter extvsplit.dll - from psppc2003.PPC2003ARM.CAB Port Splitter.exe - from psppc2003.PPC2003ARM.CAB (Settings.dat) - This is generated by Port Splitter or loaded by MortScript.

Files to be added, located in: SDMMC (card where iGO is installed) MortScript.exe - version 4.1 StartNav.exe - MortRunner.exe StartNav.mscr - The script PSinit.dat - Copy of Port Script Settings.dat file to be reloaded. The Script: Copy( ' SDMMC PSinit.dat', ' ResidentFlash Port Splitter Settings.dat', 'overwrite') if (ProcExists ('Port Splitter.exe') = 0) Run (' ResidentFlash Port Splitter Port Splitter.exe') endif Sleep 2000 #Minimize ('Port Splitter') if (ProcExists ('iGO.exe') = 0) RunWait(' SDMMC Primo iGO.exe') endif Final Bit: Point navigation button to StartNav.exe Set the GPS port in iGO sys.txt to com5. If you need to use different ports for Port Splitter, run it manually and stop it then use the exit button to generate a new settings file. Then copy file to PSint.dat I would be interested if this fixed some of the problems on 2 Din units. They would need to have ActiveSync connectivity. Hey, great instructions but no luck for me. I have exactly same problem, no connectivity, or lousy one-two satellites showing.

In my case im trying to run iGo8 (8.3.4) on a generic chinese pna with wince 4.2. Portsplitter does the job changing the port, but that seem to have no influence on iGo. Any suggestions? Tnx UPDATE: It worked when splitting on COM9 (output), but now i have a problem with saving the settings. Portsplitter doesnt want to save COM9 output (saves all other COMx outputs, but only 9 works for me). Ive deleted settings.dat, set the COM9 output, saved settings.dat to another location (similar to ur script, PSinit.dat in mortscript folder) but portsplitter doesnt want to load settings.

Hey traveller99, I honestly didnt want to drop this thing, so i ve contacted the author of port splitter. And guess what, it turns out that not saving settings for COM9 problem was a bug in port splitter. The guy replaced it with the new version and now it works. Ive even made my own shell for startup, so i dont have to start frm desktop. Instead i have a couple of icons on a Windows Bliss, with a power button and all. Like thisHi pmili, nice to see your startup.

Well done on the solving the problem. The unit I had problems with was marked eroda.

Igo Primo North America

I bought it because of the speed of the processor, but it ran like a dog with igo. The display was very jerky and far behind actual position. After searching around I came across a Lexand unit that had identical specs.

The website had a firmware recovery download. Crossed fingers and ran it. Unit fixed, except for the ratchet effect.